Hi,
can anyone ellaborate JCO and JRFC and how both are related in communicating with PI ?
Thanks,
Rekha Lakkaraju
↧
JCO and JRFC connecting to PI
↧
Migration of data
Now we are migrating to SAP Business ONE .Previously, we are using tally, how to load tally data in SAP Business ONE.
The implementation team told it's not possible to migrate data from Tally to SAP Business ONE.
↧
↧
Problem in including search help exit for MM03 transaction.
Hi,
i am trying to include search help for MM03 trasaction based on MATKL(material group) WGBEZ (description) in the form of alv tree display.
Fuctionality i want to achive is :
1. after pressing F4 on MM03, it prompts to select material group screen, on pressing F4 on material group, now i am able to get the ALV tree display of all the materials and description based on the selection screen criterion.
2. now, after selecting one material group from ALV screen, i am able to map the corresponding value on the material group on the previous(intermediate) screen, but after pressing enter on this screen, i need to get the corresponding material to be mapped on the MM03 transaction, which i am unable to get.
when i press enter, it is again going to ALV tree display only and values arent getting refreshed.
Please help me in solving this.
↧
XSOData fail while doing Application Development for SAP HANA in Learning Hub
Hi,
I am doing the Application Development for SAP HANA online course through the SAP Learning Hub with a trial account on SAP HANA Cloud Platform. I've come across many discrepancies between what I experience and what the courseware says should be happening, which I suspect has to do with my using a trial account in the Cloud Platform.
I've managed to reach page 296 of the flipbook where you are supposed to see if you can use the OData Explorer with the service that you created. At this point I get "Service Exception: [258] Insufficient Privilege" when I try to open my entity in OData Explorer. I've googled and searched various forums including this one for ways to assign privileges, but none works in my setup.
I'd appreciate some help...
Regards,
Johan
↧
I have requirement in module programming
That is when I enter the values on screen fields when click on "change" push button it should display the table control with data in edit mode based on the values given in the previous screen
↧
↧
Objet NMQMEL does not exist
Hi,
when I create a shift note and attach any document to it (like PDF or word file), on saving the shift note first time information message "Object NMQMEL XXXXX does not exist" is popping up.
I checked this object in transaction SE37 it has status ACTIVE.
this messages appears only first time and document is not attached when I open same shift note later and try to attach file then it is working.
Will anyone please guide what settings required?
↧
CVD and Addl duty of customs in Inventory valuation
Hello experts,
I searched a lot for below requirement but could not find the desired solution. the case is:
In case of import Purchase order, I am using condition values for BCD, Cess BCD,SCess BCD, CVD and Addl custom Duty. First 3 condition values will be loaded in Inventory value (during GR) and last two condition values will not be loaded in Inventory Value. Because, my plant is not having Excise registration, So, I cannot use J1IEX for capture and post.
Steps:
1. After Import PO, Inbound document is created
2. Custom MIRO is posted for where Custom dept vendor is created with and all 5 custom condition values (as clearing account) are debited.
3. In GR, Inventory is debited with GR/IR clearing amount (PO basic price) + All 5 custom condtions. Whereas, I do not want the value of CVD and Addl Duty to be added in Inventory. Through, entry is OK per normal system behaviour i.e. In custom MIRO all 5 condition values are debited and same are credited in GR accounting entry. In normal scenario, I take canvat (refund) of last 2 conditions (CVD and Addl Duty) in J1IEX, but this tcode cannot be used in this scenario as stated above.
Please suggest how can I avoid to hit last two condition values (CVD and Addl Custom duty) in Invnetory valuation during GR posting.
thanks
↧
Dont want to delete PR line items even work order get TECO.
Dear Experts,
User dont want to delete PR even work order get TECO, for example work order created and required material PR has been created as well through work order and material has been borrowed from other source and job has been completed and user did TECO what happen PR line item get deleted and due to that PO didnt process.
in this regards user want to continue to procure material through work order PR even work order get TECO as the job has been completed.
Thanks
ERP
↧
Best practice to print a PDF from SAP Work Manager 6.3
Good Afternoon,
We are currently customizing a SAP Work Manager 6.3 with meter management application ona Windows platform.
One of our main concern is to be able to print a PDF on the device based on data from the SAP Work Manager.
The idea is to be able to leave a document paper signed by the customer when the technician has finished his work.
What would be the best way to do this?
Thanks for your help,
Best regards,
Thomas
↧
↧
Bank Reconciliation
Hello Experts,
Need your guidance and suggestions, we have a scenario as given below:
In this structure what is the best way to perform bank reconciliation?
I would also like to know how we can reconcile the main group?
↧
Define several OData model asynchronously
Hello,
I try to define several OData model asynchronously.
Here how I define them (all OData models declarations are grouped in a separate function):
var oODataModel = new sap.ui.model.odata.ODataModel( "url1", { loadMetadataAsync: true }).attachMetadataLoaded(function(){ that.getView().setModel(oODataModel, "model1_odata"); });
oODataModel = new sap.ui.model.odata.ODataModel( "url2", { loadMetadataAsync: true }).attachMetadataLoaded(function(){ that.getView().setModel(oODataModel, "model2_odata"); });and so on.
The problem is that further in code I need to call to those "modelX_odata" models and do reads, while the models are still not set (async calls are still in progress).
Is there a way to wait for all those models are complete calls and are set?
Thank you,
Yuri
↧
Creating a Z-Module for Theobald software
Hi,
Im a BI Developer and i was trying to extract a SAP table using object Xtract table, but i got the following message EXCEPTION DATA_BUFFER_EXCEEDED RAISED.
From what i've got this is a problem with the row's length and some types of data.
The solution is to create a Z Module in SAP, as i've read in ERPConnect Exception - DATA_BUFFER_EXCEEDED - Theobald Software GmbH
How can i create this Z Module in SAP?
Thanks and regards
↧
Study manuals for certification exam C_TPLM30_67
Hi gurus
I am planning to appear for certification exam C_TPLM30_67 next month. Please advise me recommended study manuals and where can I get these manuals. what will be the cost for these manuals. I have already copies of PLM 300/305/310/315 and 318 but these are 2006/Q2 version.
Regards
Tanveer
↧
↧
DTW Slow Import
Hello Experts,
We are trying to import Item Master Data on production database. The client is having more than 50,000 items. So we are using HANA Database.
But while importing these Items using DTW, it takes a lot of time. We have tested the same files on SQL Database only but there it does not take so much time.
Can you please help us what we can do for HANA?
Thank you in advance.
↧
Restore Journals Error - Column () must be specified in journal file
Hi All,
I am trying to restore journals with the package and I am getting - Column () must be specified in journal file. I have run a export journal in the same system and all I am trying to do is restore the journals into a different category.
I have downloaded the file and changed the catagory value to ACTUAL to ACTUAL_DUMMY. The restore is failing inspite of clearing all the journals.
Please help.
Thanks,
Sreeni
↧
Direct SAP certification during notice period
Hi All,
Can I give direct SAP certification if I am currently serving notice period with my present employer.
If any one has idea let me know.
Regards,
Sandeep
↧
Monitoring performance of service agents
Hi experts,
Is there any option existing in SAP C4C to measure the performance of service agents? I have searched in reports but can't find any performance related report that can measure it for agents. Please help how should I do this?
Regards,
Pragati
↧
↧
Adapter module or Java mapping to convert object into an array in JSON output
Hi
I am on single stack SAP PO. Mine is a REST to RFC synchronous call. I am using Java mapping to convert the xml to JSON. The ECC system is sending a URL in the response message. If I use the conversion of REST adapter, the forward slashes in the URL are escaped with a backward slash.
So I have to use Java mapping.
Because of that, I cannot use the SAP's method to convert xml into JSON.
In my target payload, there is a node called "Item".
"Items" : [
{
"Quantity": 1,
"UnitOfMeasure": "EA",
"MaterialDescription": "ABCD"
}
{
"Quantity": 2,
"UnitOfMeasure": "FR",
"MaterialDescription": "FGHI"
}
]
This appears an array!
If there is only one set of values, then Items appear as object
"Items" : {
{
"Quantity": 1,
"UnitOfMeasure": "EA",
"MaterialDescription": "ABCD"
}
}
I want the node "Items" to appear as array always. If it is an array then let it be array, and if it is an object it should be an array.
Is there a way to achieve this using existing Adapter module or through a Java Mapping?
Regards
Harish Babu
↧
Debugging code from ESS
Hi All,
Having a requirement to upload document from Reimbursement claims screen in ESS to archive link. Tried by implementing the BADI HRPBSIN_PROCESS_ATTACHMENTS .When the upload button was clicked the debugger did not reach the point in BADI . As the implementation of BADI did not solve the problem, wanted to debug the code under the upload button, as the code that is called attaches documents to DMS .Now my question is how to debug the webdynpro abap codes from ESS ,so that we could implement the code to upload documents to archivelink if any enhancement is provided . Could suggest any ideas/tips.
Thanking in advance,
Regards,
Ramesh
↧
Table Data does not refresh
Hello Experts,
I have created a Table with data with model1
I have a button on UI to update one of the column value showing up in Table.
Once i update it from UI, value gets updated in backend database but does not reflect on UI .
PS : I am using the same Model1 to call the Update Query
Kindly help
↧